Electricians & Plumbers in Ringgold, GA

Electrical Installation: Installed a customer-supplied outdoor ceiling fan on a covered patio at a residential property. Verified the existing electrical box and circuit were rated for exterior fan use, mounted the weather-resistant fan assembly, and completed all wiring connections according to manufacturer specifications. Tested fan operation, speed settings, and integrated lighting to ensure safe performance and proper airflow throughout the outdoor seating area.

Completed a professional plumbing service installing a new sewer ejector pump to ensure reliable wastewater removal from the property. The old unit was removed and replaced with a high-performance ejector pump, restoring proper drainage and preventing potential backups. If you're searching for ejector pump installation or sewer pump repair near me, we provide fast, dependable plumbing solutions to keep your system running smoothly.

Completed a 3.5 ton gas pack unit replacement for a homeowner today. Removed the old, inefficient system and installed a new high-efficiency gas package unit to improve heating and cooling performance, airflow, and overall energy savings. Ensured all electrical, gas, and duct connections were properly secured and tested for safe operation. System is now running strong and ready for the upcoming seasonal demands. Another reliable HVAC installation done right.

Completed replacement of an existing hose bib due to wear and leakage issues. Shut off water supply, removed the faulty unit, and installed a new, code-compliant hose bib. Ensured all connections were properly sealed and secured. Restored water service and tested for leaks and proper operation—no issues found. Verified adequate water flow and functionality. Work area was cleaned and left in good condition.

Removed existing 50-gallon gas water heater and properly disconnected gas, water, and venting connections. Installed new 50-gallon gas water heater, ensuring all connections meet current plumbing and gas code requirements. Upgraded fittings and installed new water supply lines as needed for a secure and leak-free installation. Installed new shut-off valve and ensured proper gas control connection with leak testing performed. Verified proper venting and draft for safe operation. Filled and pressurized system, then tested unit for proper heating and performance. Checked for leaks on all connections and confirmed system is operating efficiently. Cleaned up work area and disposed of old unit.

Replacement of faulty breaker in panel

Completed a professional plumbing service installing a new P-trap under a kitchen sink for a local homeowner. The existing trap was outdated and causing slow drainage and minor leaks. We removed the old assembly and installed a properly fitted P-trap to ensure optimal drainage and prevent sewer gases from entering the home.

Arrived on site to diagnose a running toilet issue. After inspection, found the toilet flapper was worn and not sealing properly, causing continuous water flow from the tank to the bowl. Turned off the water supply to the toilet and drained the tank. Removed the old flapper and installed a new, properly sized flapper to ensure a tight seal. Adjusted the chain length for proper operation and optimal flush performance. Turned the water back on, allowed the tank to fill, and tested multiple flush cycles to confirm proper function. Verified there were no leaks and that the toilet is now operating efficiently without running.

Completed replacement of the kitchen sink P-trap and drainage assembly due to leaks and worn components. Removed the old trap and drain piping and installed a new P-trap, extension tube, and slip-joint fittings to ensure proper drainage and prevent sewer gases from entering the home. All connections were tightened and the system was tested under running water to confirm proper flow and no leaks.

Completed a vent pipe replacement today to restore proper airflow and ensure the plumbing system is venting correctly. The existing vent pipe was damaged and causing drainage issues. Removed the faulty section and installed new piping, securely sealed all joints, and tested the system to confirm proper function.

Came out and cleaned a Rinnai tankless water heater to improve performance and efficiency. Flushed the unit to remove mineral buildup and debris, inspected the system for proper operation, and ensured hot water was flowing correctly. Regular tankless water heater maintenance helps prevent breakdowns and extends the life of the system.

Completed a full water heater replacement today. Removed the old, failing unit and installed a new, energy-efficient water heater. Updated water supply lines, reconnected gas line and venting, and tested for proper operation and leaks. Ensured temperature and pressure relief valve was properly installed and functioning. System is running properly and delivering consistent hot water.

came out and serviced a Rinnai tankless water heater that was experiencing venting and performance issues. Inspected the unit and found debris buildup inside the heater and venting system. Thoroughly cleaned debris from the Rinnai water heater to restore proper airflow and safe operation. Reset and properly secured the vent stack to ensure correct alignment and code-compliant venting. System was tested after service and is now operating safely and efficiently.

Came out and serviced a Rinnai tankless water heater. Pulled and cleaned the blower motor assembly, removing debris buildup to restore proper airflow and operation. Inspected venting components and verified the unit was operating correctly after cleaning. Routine maintenance completed to help improve performance and efficiency of the Rinnai water heater.

Checked in to address an active roof leak caused by a failed vent boot and deteriorated vent pipe. Removed the damaged roof boot and inspected the vent penetration for cracks and weather damage. Installed a new properly sized roof vent boot, replaced the compromised section of vent pipe, and sealed all flashing to ensure a watertight connection. Final inspection confirmed no leaks and proper venting through the roof. Home is now protected from moisture intrusion and future roof leaks.

plumber came out and removed old, deteriorating ½-inch copper piping connected to the water heater. To improve water flow and reliability, we upgraded the line to new ¾-inch copper, installing a total of 14 feet from the water heater. All connections were properly soldered, secured, and tested to ensure safe, leak-free operation. The customer now has a more durable and efficient water supply line.

came out and installed a new tankless water heater, upgrading the home to an energy-efficient, on-demand hot water system. The old unit was removed, and the new tankless water heater was properly mounted, piped, vented, and tested to ensure safe operation and reliable hot water throughout the home. System was fully inspected, startup completed, and the customer was informed on proper operation and maintenance.

Came out and serviced a Rinnai tankless water heater. Performed a full system inspection, cleaned internal components, checked gas and water connections, and verified proper operation. Ensured the unit was running efficiently and safely, providing reliable hot water for the home before completing the service.

Checked in today to service a tankless water heater. Performed a full system inspection, flushed and descaled the heat exchanger, cleaned inlet filters, and verified proper gas pressure and venting. Ensured the unit is operating efficiently and producing consistent hot water. Regular tankless water heater maintenance helps extend the life of the system, improve performance, and prevent costly breakdowns. Customer is now set up for reliable hot water and peak efficiency.