Electricians & Plumbers in Tunnel Hill, GA

Electrician is inspecting power to a garbage disposal

Electrician is installing new floor outlets

Electrician is installing new switches and cleaning up bad wiring

I installed two new 6x14x8 supply grills and boots, ensuring proper airflow. Additionally, I installed a new 8x14x10 return boot and grill, enhancing the system's efficiency.

Completed a plumbing repair to address a failed coupling on the water line. Repaired and secured the affected connection, then restored the water supply to the property. Inspected the repaired area under pressure and checked all surrounding connections for signs of leakage. Water service was restored successfully with no leaks present, and the plumbing system was left in good working order.

Installed customer-supplied whole-home filtration system with two shut-off valves to allow for easy servicing and maintenance of the filtration system. Installed a new pressure-reducing valve (PRV) and whole-home shut-off valve. Turned the water back on and thoroughly checked all connections for leaks. Once no leaks were found, tested the system for proper operation and cleaned the workspace.

Completed installation of a new bathroom vanity and faucet, along with a new P-trap connected to the existing drain line. Replaced one leaking angle stop, which was identified as the source of the leak. Turned the water back on and tested the system for proper flow and operation. Checked all connections for leaks and confirmed no leaks were present. Cleaned and organized the workspace upon completion

Started a new home water filtration system installation for a local homeowner. Our team is installing a whole-home filtration solution designed to improve water quality throughout the home, providing cleaner, better-tasting water for everyday use. We’re making sure the system is properly installed, connected, and configured for reliable performance.

Successfully installed 2 new drain branch lines for a washing machine and kitchen sink. The new plumbing was properly routed, connected to the main drain, and securely strapped for reliable performance. We also worked through existing masonry to access the crawl space and completed the installation with proper drainage flow and support.

Started a partial waste drain repipe on a nearby property today. We’re replacing damaged drain lines to improve flow and help prevent future plumbing issues. If you’re experiencing recurring drain problems, backups, or aging pipes, contact us to schedule an inspection.

Arrived on site to replace a faulty angle stop valve. Shut off the home’s water supply, removed the existing angle stop, and installed a new quarter-turn angle stop. Turned the water back on and thoroughly checked the new connection for leaks. Verified proper operation of the fixture and confirmed there were no leaks. Cleaned the work area before leaving the job site.

Collected a water sample and performed a comprehensive water quality test for a customer interested in a Halo 5 whole-house water filtration system. Tested the water to determine hardness levels, chlorine content, and overall water quality to ensure the proper filtration solution is recommended. Reviewed the results with the customer and discussed the benefits of the Halo 5 system for improving water quality and protecting plumbing fixtures and appliances. Cleaned work area and documented findings for the estimate.

Arrived on site and met with homeowner to discuss water quality concerns and options for whole-home water treatment. Inspected the existing plumbing system and evaluated the best location for installation of a HALO 5 whole-house water filtration system. Explained the benefits of whole-home filtration, including reduction of chlorine, sediment, and other common contaminants while helping protect plumbing fixtures and appliances. The HALO 5 is designed to filter and condition water at the point of entry so all fixtures throughout the home receive treated water. Provided homeowner with a detailed quote for equipment and installation and answered all questions regarding system operation and maintenance. Cleaned work area before departure

Performed a full plumbing inspection due to a recent water main break approximately one mile away and to verify all plumbing systems in the area were functioning properly. During the inspection, I found the home’s water pressure was excessively high. Tested the pressure and recorded 110 PSI. Further inspection revealed a failed thermal expansion tank. Replaced the pressure reducing valve (PRV) and thermal expansion tank. After installation, retested the water pressure and confirmed it was operating at 58 PSI. Inspected the plumbing system for proper operation and verified all fixtures and components are functioning correctly. No issues found at this time.

Electrician is installing a new ac disconnect

Completed a service call installing a new hose bib for a homeowner in the area. Removed the old, leaking outdoor spigot and replaced it with a durable, high-quality hose bib to ensure reliable water access and prevent future leaks. Checked water pressure and connections to guarantee everything is working properly and up to code.

Completing a panel replacement