Electricians & Plumbers in Cedartown, GA

Removed the old, non-functioning water heater and installed a new 40-gallon electric water heater. Once the installation was complete, allowed the glue to dry before turning the water back on. Checked all connections for leaks and verified that no leaks were present. Cleaned the work area and left the workspace neat upon completion.

diagnosed water heater as bad. sent customer quotes.

I conducted a thorough diagnostic inspection of the water heater to pinpoint the malfunction. I meticulously evaluated the unit and its components, identifying potential issues that could affect its proper operation. I explained the findings and recommended repairs to the customer, emphasizing that further repairs might be necessary based on the diagnosis. The work area was left clean and tidy upon completion, ensuring a professional and satisfactory experience.

Electrician is repairing a pool panel gfci lighting circuit

I successfully replaced around 18 feet of 1 1/2-inch drain piping, extending from Unit 5 to Unit 7, which included the kitchen drain connection. The old piping was carefully removed and replaced with new sections, ensuring a secure and leak-proof connection. After installation, I meticulously cleaned the work area, removing any debris and ensuring everything was left neat and tidy. The plumbing work is now complete, and the area is prepared for the restoration team to resume their tasks.

Upon arrival, found cracked cast iron piping serving Unit 5’s sink. Cut out and removed the damaged cast iron and replaced approximately 18 feet of piping with PVC, properly connecting the new piping to the Unit 5 sink drain. Once all connections were completed, ran water through the system and thoroughly checked for leaks. No leaks were found, and the system is draining properly. Cleaned and organized the work area upon completion.

Water heater has been safely uninstalled and removed to allow the remediation team access to the affected area. The area is now ready for the remediation team to begin demolition and remove the damaged materials.

Upon arrival, evaluated the existing boiler system for a 50-unit apartment building and provided a quote for installing two new boiler systems. Reviewed the system requirements and discussed the proposed equipment and installation needs. Prepared pricing for the recommended boiler setup

Electrician, given free electrical estimate for panel replacements

Our team excavated and repaired a ruptured water line while also replacing a section of deteriorated cast iron sewer pipe to restore reliable water flow and drainage. The damaged pipe was removed and replaced with durable new materials for a long-lasting repair.

Electrician is replacing a burnt electrical panel

Installing new l e d bulb

Just wrapped up a service call fixing a leaking hose spigot for a homeowner nearby ???? If your outdoor faucet is dripping, leaking at the handle, or not shutting off properly, it can waste water and lead to bigger issues over time. We repaired the hose bib and made sure everything is sealed and working like new.

Completed plumbing repairs by fixing two faulty shower drains to restore proper drainage and prevent leaks. Also removed and replaced a 4-foot section of improperly back-pitched PVC drain line, ensuring correct slope for optimal flow and long-term performance. Another reliable plumbing service completed with attention to detail and quality workmanship.

Completed a professional plumbing service installing a new outdoor hose spigot for the homeowner. Ensured proper connection to the water supply, secured fittings, and tested for leaks to guarantee reliable performance. This new hose bib provides convenient outdoor water access for gardening, cleaning, and general use. Another quality plumbing installation done right with attention to detail and long-lasting results.

Came out and cut out a 5-foot section of 2-inch PVC drain line serving a grease trap and hand sink. Reassembled and secured the piping to meet current plumbing code and ensure proper drainage flow. Tested the system and confirmed everything is working correctly.

Came out and cleared a clogged commercial sink drain. Removed buildup and restored proper drainage to prevent backups and downtime. Customer’s sink is flowing normally again.

The original faucet had internal wear causing leaks and inconsistent water pressure. The existing supply lines and angle stops were also outdated and showing signs of corrosion, so they were upgraded to ensure long-term reliability and proper shut-off functionality. Upgrading angle stops and supply lines during a faucet replacement helps prevent future leaks and makes future servicing easier.

Completed a full basement plumbing rough-in today. Installed new drain lines, venting, and water supply lines for future bathroom and utility connections. Tied into the main sewer line and ensured proper slope and venting for code compliance. Pressure tested all water lines and verified secure fittings with no leaks. Basement is now fully prepped for fixtures including toilet, shower, and sink installation. Clean, organized layout for easy access and future finishing.

Technician arrived on site to address a busted copper water line. Isolated the water supply and removed a damaged 1-foot section of copper pipe. Installed new copper piping with proper fittings, soldered all connections, and restored water service. System was pressure tested to confirm there were no leaks. Area was cleaned up and repair completed successfully.

Arrived on site for plumbing service and found the existing P-trap leaking due to corrosion and worn slip-joint washers. Shut off water, removed the damaged P-trap, and installed a new properly sized P-trap assembly. Ensured correct alignment and slope for proper drainage, tightened all connections, and tested the drain for leaks. Drain is now flowing correctly with no leaks present. Customer was informed of the repair and proper drain usage.