Electricians & Plumbers in Douglasville, GA

pls call/text once on the way.

Arrived on site to investigate a reported leak in the kitchen ceiling. Ran water in the upstairs bathroom fixtures to try to replicate the issue; however, no active leak was found at this time. Performed a full system check and discovered that the home’s water pressure is elevated beyond the recommended range. Determined that the pressure-reducing valve (PRV) is no longer functioning properly and the thermal expansion tank is also compromised. Recommended replacement of both the PRV and thermal expansion tank to bring the system back within safe operating pressure and prevent potential future leaks or damage.

Arrived on site to diagnose a gas water heater that was not producing hot water. Upon inspection, found that the pilot light was out. Checked the gas supply, thermocouple condition, and ensured there were no safety concerns or gas leaks present. Successfully relit the pilot light and confirmed proper operation of the water heater. Monitored the unit to ensure the burner ignited correctly and maintained a steady flame. Verified that the water heater is now heating properly and functioning as intended. Cleaned up work area and advised homeowner on proper operation and what to watch for if the issue reoccurs.

Arrived on site to address high water pressure and failing components on the home’s plumbing system. Upon inspection, found the pressure reducing valve (PRV) had failed, resulting in house pressure reading at 104 PSI, which is above safe operating limits. Replaced the faulty PRV with a new 1-inch pressure reducing valve and installed a new thermal expansion tank on the water heater to properly manage thermal expansion and protect the system. After installation, tested water pressure and confirmed it is now properly regulated at 64 PSI. Checked all connections and fittings to ensure there are no leaks and system is functioning as intended. Work area was cleaned and all equipment removed upon completion.

Performed service on toilet that was backing up and not flushing properly. Used a hand auger to clear the obstruction in the drain line, successfully removing a small amount of toilet paper buildup causing the issue. After clearing the blockage, tested the toilet by flushing six times to ensure proper flow and functionality. Toilet is now operating correctly with no signs of slow drainage or backup.

Completed a professional kitchen faucet installation, ensuring all connections were secure, leak-free, and operating at optimal water pressure. Removed the old unit and installed a new, efficient fixture to improve both functionality and style in the kitchen. Tested thoroughly for proper operation and clean finish.

Came out and repaired a 1 1/2 inch water line leak. Located the damaged section, cut out the broken pipe, and installed new PVC piping with proper fittings to restore full water service. Tested the line for leaks and confirmed proper water pressure before leaving the job site.

Came out and installed a new kitchen sink, connected the drain assembly, and secured the faucet and supply lines. Tested for leaks and verified proper drainage to ensure everything is working correctly.

Came out and cleared a main line blockage, restoring proper drainage throughout the home. Used professional drain cleaning equipment to remove the obstruction and ensure the sewer line was flowing freely again. Checked system for any additional issues and confirmed all fixtures were draining correctly before leaving the job site.

Completed a professional toilet replacement today. Removed the old, inefficient unit and installed a new high-efficiency toilet. Replaced the wax ring, closet bolts, and supply line to ensure a secure, leak-free connection. Checked flange condition and tested for proper flush performance and water tight seal. If you’re dealing with leaks at the base, constant running, cracks in the bowl, or just upgrading to a more efficient model, a professional toilet installation ensures everything is sealed, level, and functioning properly.

Came out and professionally installed a new basin pump with a utility sink to properly handle a washer drain. Connected the pump system to the home’s main drain, ensuring proper flow, venting, and code-compliant operation. This setup prevents backups and improves drainage for laundry use. Another reliable plumbing solution completed to keep the customer’s home running smoothly. 🚿🔧

Came out to the customer’s home and completed multiple plumbing repairs. Installed new stems on the shower valve to restore proper operation and stop leaks. Also replaced a faulty hose spigot to ensure reliable outdoor water access. Tested all repairs to confirm everything is working correctly and leak-free.

Completed a full service main replacement for a residential home, upgrading the existing water line to new PEX piping. Safely shut off the water supply, removed the failing service line, and installed a new PEX service main from the connection point into the house. All connections were properly secured, pressure tested, and inspected for leaks to ensure reliable water flow and long-term durability. System was restored and verified to be operating correctly before leaving the job site.

Came out today and installed a new tankless water heater, providing the customer with endless hot water and improved energy efficiency. Removed the old unit, made all necessary water and gas connections, verified proper venting, and tested the system to ensure safe and reliable operation. Customer now has on-demand hot water with reduced energy costs.

Electrician installing breaker and panel

Electrician mounting 85 inch TV above fireplace

Electrician installing receptacle for microwave

Electrician installing 30 amp generator inlet plug

Electrician installing 50 amp outlet in garage.