Electricians & Plumbers in Acworth, GA

I like trishing giving a free electrical estimate for circuit install

Arrived on site to provide a quote for replacing an existing sink and faucet. Evaluated the current plumbing setup and discussed options with the homeowner. Also inspected the drain configuration and provided a quote to convert the existing double-basin drain system to a single-basin drain setup. Reviewed the scope of work, materials needed, and answered any questions regarding the proposed installation. No work was performed at this time.

Arrived on job site and found a puddle of water on the basement floor. Removed sections of the drop ceiling with the homeowner to search for the source of the leak. Ran all water fixtures upstairs and inspected all visible drain lines and water lines, but no active leaks were found at this time. Advised homeowner to monitor the area during rainfall to determine if the leak may be weather related. Also advised homeowner that if the leak returns, to take a video of it and give us a call for further diagnosis.

Completed conversion of existing Blackstone grill from propane to natural gas and connected grill to natural gas supply line. Installed proper conversion components and verified all gas connections for leaks and proper operation. Lit and tested all burners and fixtures on the grill to ensure proper ignition, flame pattern, and functionality. Confirmed grill is operating properly on natural gas and cleaned work area.

Performed sewer inspection to determine if property was connected to city sewer or septic system. Verified home is connected to a septic system. Provided estimate for installing and connecting a Blackstone grill to existing natural gas line. Discussed gas line routing, connection requirements, and proper sizing for safe operation. Cleaned work area and answered all customer questions regarding installation options.

EaZy Pros HVAC completed a professional 3.5 ton heat pump installation in Acworth, Georgia after removing an older failing HVAC system. Our licensed heating and air technicians installed a new high-efficiency heat pump system designed to improve indoor comfort, lower energy costs, and provide reliable heating and cooling year-round. If you are searching for HVAC replacement, heat pump installation, AC replacement, or heating and air services in Acworth, GA, EaZy Pros provides expert HVAC solutions with quality workmanship and dependable service. Services included:• 3.5 ton heat pump replacement• Full HVAC system installation• Removal of existing unit• Heating and cooling system upgrade• Energy-efficient HVAC equipment installation Serving Acworth, Kennesaw, Cartersville, Adairsville, and surrounding North Georgia areas. https://www.eazypros.com/

Electrician installing surge protection

Electricians installing tesla charger

Electrician completing panel replacement

Completed plumbing and maintenance service in the area today. Installed a brand new bathroom faucet, ensuring all connections were secure and leak-free, and verified proper water flow and operation. Also removed the old, dirty HVAC air filter and replaced it with a new, properly sized filter to improve airflow and indoor air quality. System was tested after installation to confirm everything is working efficiently. Another reliable and professional service completed for a local customer.

Giving free electric estimate for floodlight replacement

Electrician, giving free electrical estimate for panel replacement

Arrived on site to replace an existing 40-gallon gas water heater with a new electric water heater. Safely disconnected and removed the gas unit, ensuring gas line was properly capped and secured. Installed new electric water heater, including all necessary water connections, shut-off valve, and proper venting adjustments no longer required for electric. Upgraded the electrical panel to support the new electric water heater, including installing the appropriate breaker and running a dedicated circuit to meet code requirements. Verified all electrical connections were secure and up to code. Filled the water heater, purged air from the system, and powered on the unit to ensure proper operation. Checked thoroughly for leaks and confirmed the system is heating correctly

Installed a new, durable hose bib, ensuring all connections were properly sealed and secured to prevent future leaks. Turned the water supply back on and thoroughly tested the new fixture to confirm proper operation, water flow, and no visible leaks. Work area was cleaned and left in good condition. The new hose bib is functioning correctly and ready for normal use.

Completed a full kitchen plumbing upgrade today. Removed the existing kitchen sink, outdated faucet, old garbage disposal, and worn P-trap assembly. Installed a new kitchen sink along with a modern faucet, ensuring proper alignment and secure mounting. Installed a new garbage disposal unit, connected to the existing electrical and drain system, and tested for proper operation. Replaced the P-trap with a new assembly, ensuring correct pitch and a tight seal to prevent leaks and allow proper drainage. Turned water back on, checked all connections, and verified there are no leaks. Disposal is functioning properly, and sink is draining as it should.

?Checked in today to install new landscape lighting. Work includes placing low-voltage fixtures to enhance curb appeal, improve nighttime visibility, and add security around the property. System will be properly wired, tested, and set for optimal performance and longevity.?

Performance a hvac tune up.

Conducted a comprehensive HVAC system maintenance and inspection in preparation for a home sale. The outdoor condenser coil was meticulously cleaned, removing debris from the base and coil fins to restore optimal airflow and efficiency. All electrical components, including capacitors, contactor, and wiring connections, were inspected to ensure safe operation. Refrigerant levels were verified, and system pressures were checked, confirming operation within manufacturer specifications. The condensate drain line was cleaned and sanitized to prevent clogs and water backup issues. The indoor air handler was inspected, focusing on blower components to ensure proper airflow and performance. Deteriorated line set insulation was noted, and a recommendation for replacement was made to improve system efficiency and prevent energy loss. The HVAC system is currently operating properly with no major issues found. The system is in good condition and ready for the home sale process.

Just completed installation of a Moen Smart Water Monitor to help the homeowner detect leaks early and protect their property from water damage. This system provides real-time monitoring, automatic shutoff capabilities, and peace of mind knowing their plumbing is being watched 24/7. If you're looking to upgrade your home with smart plumbing technology or need professional installation, we?ve got you covered. Serving the local area with reliable and efficient plumbing solutions!

Installed a brand-new kitchen faucet, improving both functionality and style. Ensured all connections were secure, leak-free, and operating perfectly for long-term reliability. If you're dealing with a leaking, outdated, or low-pressure faucet, professional installation makes all the difference. Fast, clean, and done right the first time.

Completed service call to replace a faulty pressure reducing valve (PRV) and restore proper water pressure throughout the home. Installed new PRV, tested system, and verified stable, code-compliant pressure levels. Also cleared a clogged master bathroom sink drain. Removed blockage, flushed the line, and confirmed proper drainage with no backups. System is now operating efficiently with improved water pressure and fully functional drainage.

Completed a pressure reducing valve (PRV) replacement today to restore proper water pressure throughout the home. The existing PRV had failed, causing inconsistent pressure and stress on the plumbing system. Removed the old valve and installed a new PRV, ensuring all connections were secure and up to code. Adjusted the pressure to a safe and optimal level and tested the system for proper operation and leaks. Customer now has stable, regulated water pressure, helping protect fixtures, appliances, and piping from damage.

Giving a free electrical estimate for lighting project

Completed a service call today where we pulled and reset a toilet to fix sealing issues and ensure proper function. During the job, we also replaced the shut-off valve to the toilet, giving the homeowner reliable water control and preventing future leaks.

Completed a backflow device replacement on a 3-inch PVC sewer line. Removed the failed backflow assembly and prepped the existing pipe for a proper install. Installed new backflow device with secure fittings, ensuring correct flow direction and proper alignment. All connections were glued and sealed to code, then system was tested for leaks and proper operation. Area was cleaned up and system is now flowing correctly with no backups.