Cartersville, GA

Successfully installed a mini split system tailored for an electric vehicle. This involved assessing the vehicle's interior to determine optimal placement for the unit. Carefully mounted the indoor and outdoor units, ensuring they were securely fastened and aligned for maximum efficiency. Ran and connected necessary electrical wiring, ensuring all connections were safe and compliant with industry standards. Conducted thorough testing to confirm the system operated correctly, providing efficient heating and cooling. Provided detailed instructions to the vehicle owner on system operation and maintenance. The installation was completed with precision, enhancing the vehicle's comfort and functionality.

Upon inspection, the heat pump was in a low-pressure lockout state. I reset the power and verified the unit's charge to ensure it was operating correctly. Next, I examined the thermostat and found it was not activating the heat strips. To resolve this issue, I replaced the thermostat with a new one, ensuring it was properly configured and tested. After the replacement, I checked the system to confirm that the heat strips were functioning as intended, restoring proper heating functionality.

Upon arrival, the customer expressed confusion regarding thermostat operation. I demonstrated the correct usage and functionality of the thermostat. Following this, I inspected the 80% gas furnace to ensure it was operating efficiently. The furnace was found to be in good working condition, and the thermostat was correctly set to maintain the desired temperature.

A new light fixture was installed, requiring precise measurements and careful wiring. The old fixture was removed, and the electrical box was inspected for any damage. A new electrical box was installed if necessary, and the wiring was connected to the new fixture. The fixture was mounted securely, and the bulbs were installed and tested to ensure proper functionality. The area was cleaned up, and all tools and materials were properly stored. The job was completed efficiently and safely, with attention to detail and adherence to electrical codes and regulations.

I successfully installed a new light fixture, ensuring it met all safety standards and local regulations. The process began with a thorough assessment of the existing electrical setup to determine the best placement for the fixture. I then carefully removed the old fixture, if present, and installed the new one, making sure all connections were secure and properly insulated. The fixture was mounted with precision, and the wiring was neatly organized to avoid any potential hazards. After installation, I tested the fixture to ensure it functioned correctly and provided adequate lighting. The job was completed efficiently, leaving the area clean and safe.

Successfully installed a modern, energy-efficient light fixture, enhancing the aesthetic appeal and functionality of the space. The project involved precise measurements, careful wiring, and secure mounting. Attention to detail ensured a seamless integration with existing electrical systems. The fixture was chosen for its durability and stylish design, providing optimal lighting. Post-installation, a thorough inspection confirmed the fixture's proper operation and safety compliance. The result was a beautifully lit area that met the client's expectations.

Electrician is replacing a light fixture

Working at the shop

quote sent to customer

Ac unit replaced contractor low voltage wire and thermostat

No cool or heat call unit shorted out some kind of surge got the contractor thermostat and transformer also replaced low voltage wire from building bot ac unit

Electrician, giving a free electrical estimate for panel replacement

Electrician replacing two faulty breakers

Electrician completing electrical safety inspection

Electrician is installing a new electrical service

sewer line snaked. cityjetted their line

Electrician is replacing a old worn out outlet

Dispatched to a home in Cartersville for a fall time furnace safety inspection where the customer reported a burning dust odor when turning on their heat for the first time this fall. We inspected the heat exchanger on a Carrier gas furnace, cleaned the dirty flame sensor, and tested all high-limit switches and safety cutoffs. After replacing the air filter with a high-flow pleated media unit, we verified smooth, reliable ignition and a crisp 120-degree supply air stream across all main floor registers.

Electrician is repairing smart switches

Checking in from the EaZy Pros office in Cartersville, GA! Our team provides HVAC, electrical, and plumbing services throughout Cartersville and Northwest Georgia. From AC repair and system replacement to electrical upgrades, water heaters, plumbing repairs, generators, and more, EaZy Pros is ready to help keep your home safe and comfortable.

Dispatched to a home in Cartersville to address an issue where the main breaker kept tripping whenever the central cooling system kicked on. Evaluated the electrical panel and identified a failed 40-amp double-pole breaker that was severely overheating under load. Replaced the faulty breaker with a new, heavy-duty switch and torque-tested all bus bar connections for proper contact. The panel now runs cool and handles the heavy motor startup without interruption.

Pulled up to a home near the North Towne area of Cartersville where the homeowner said the AC had been cooling poorly for about three weeks and two companies had already been out without finding anything wrong. Ran a careful diagnostic and found a failed thermostatic expansion valve that was restricting refrigerant flow through the evaporator coil. When a TXV fails in a Northwest Georgia summer the system just cannot pull heat and humidity out of the air the way it needs to and it can look fine on a basic check if you are not testing the right things. Replaced the valve, verified refrigerant charge and pressures, and ran an extended cooling cycle to confirm the system was performing correctly. House reached set temperature for the first time in three weeks.

Giving a free electrical estimate for circuit correction

Arrived on site and removed the existing 1/2 HP garbage disposal. Installed a new 1/2 HP garbage disposal, reconnected the drain and electrical connections, and verified all fittings were secure. Restored power and tested the disposal for proper operation while checking for leaks. Unit is functioning correctly with no leaks found. Cleaned the work area and left the installation complete and operating as intended.

Installed two high-quality Studor vents on lavatory drain lines to improve air flow and ensure proper venting throughout the plumbing system. Reconfigured the shower drain to correct pitch and alignment, allowing for smooth drainage and preventing future clogs or backups. All work completed to meet local plumbing code, improving overall system performance and reliability.