Electricians & Plumbers in Douglasville, GA

Removed and replaced the existing fill valve with a new fill valve to restore proper water level and flushing operation. Also replaced the existing shut-off valve serving the same toilet to ensure reliable water supply control and proper shutoff capability. After completing the installation, all connections were inspected for leaks and the toilet was tested through multiple fill and flush cycles. Verified that the new fill valve, shut-off valve, and toilet are operating properly with no visible leaks at the time of completion.

Removed the broken tub drain and replaced the drain and overflow assembly. Access to the plumbing was made through a square cutout in the drywall, and I installed an access panel over the opening for future service and maintenance.

Arrived at the location and completed the installation of a new overflow assembly. The existing overflow components were removed as necessary, and the new assembly was installed and secured to ensure a proper fit and reliable operation.

installed a new bathroom faucet cartridge. The faucet is functioning properly and the repair is complete.

installed a new bathroom faucet cartridge. The faucet is functioning properly and the repair is complete.

Replaced the cartridge on an American Standard bathroom faucet to resolve a persistent drip. Once the new cartridge was installed, the faucet was tested to ensure proper operation. The drip was completely stopped, and the faucet is now functioning properly with no leaks. Work area was cleaned upon completion.

Arrived on site and found the kitchen sink backed up due to a blockage in the drain line. Ran the sewer machine twice to fully clear the obstruction. After the line was cleared, filled and drained the kitchen sink four times to verify proper drainage and ensure the blockage was completely removed. Confirmed the drain was flowing properly with no further backups. Cleaned the work area before leaving the job site.

Replaced the main water service line from the city meter to inside the home with new piping. Once the installation was complete, the water was turned back on and the entire system was thoroughly inspected for leaks. Verified proper water pressure and confirmed all connections were secure and functioning correctly. Cleaned the work area and removed all debris before completing the job.

Performed a professional hydro jetting of the main sewer line to clear heavy buildup, grease, and debris. Restored proper flow and drainage throughout the system while helping prevent future backups. Thoroughly tested the line to ensure optimal performance. Another effective solution completed to keep the plumbing system running smoothly.

Installed a brand-new garbage disposal, improving kitchen functionality and efficiency. Removed the old unit, inspected the drain and electrical connections, and ensured a secure, leak-free installation. Tested the system for proper operation and smooth drainage. Another reliable plumbing upgrade completed with quality workmanship and attention to detail.

Completed a professional garbage disposal installation for a homeowner in the area today. Removed the old, malfunctioning unit and installed a brand-new garbage disposal, ensuring all plumbing and electrical connections were properly secured and up to code. Tested the system thoroughly for leaks, proper drainage, and smooth operation. The new disposal is running efficiently and quietly, restoring full functionality to the kitchen sink. Another reliable plumbing upgrade completed with quality workmanship.

Completed a professional sewer camera inspection of the main drain line for a homeowner in Alpharetta, GA. Performed a full video inspection to assess the condition of the main sewer line, checking for blockages, root intrusion, cracks, or pipe deterioration. Provided the customer with clear findings and recommendations to ensure proper drainage and prevent future issues. If you need a reliable main line inspection or sewer diagnostics in Alpharetta, we?re here to help!

Completed a professional garbage disposal installation for a homeowner in Alpharetta, GA. Removed the old, malfunctioning unit and installed a brand-new garbage disposal, ensuring all plumbing and electrical connections were properly secured and leak-free. Tested the system for smooth operation, proper drainage, and optimal performance. Left the kitchen clean and fully functional. If you?re looking for reliable garbage disposal installation or plumbing services in Alpharetta, we?re ready to help!

Installed a new CPVC shut-off valve for the toilet water supply line. Shut off main water, drained line, and cut into existing CPVC piping. Fitted and secured new shut-off valve with proper CPVC solvent weld connections to ensure a leak-free seal. Restored water supply, tested operation of valve and toilet fill system, and confirmed no leaks at connections. Job completed successfully and system is functioning properly.

Completed a professional plumbing service call repairing a malfunctioning garbage disposal and fixing a faulty washing machine valve. Diagnosed the disposal issue, restored proper operation, and ensured smooth drainage from the kitchen sink. Also repaired the washing machine valve to stop leaks and restore proper water flow to the appliance. System tested thoroughly to confirm everything is working efficiently.

Electricity given a free electrical estimate for led upgrade

Arrived on site and met with the office staff, who showed me the area where the reported leak was occurring. Performed a full inspection and diagnostic evaluation of the affected area. After testing and investigating, I determined that the issue is not related to the plumbing system. Verified there were no active leaks on any water lines by shutting off and monitoring the property’s main water supply and confirming that the water meter was not registering any movement. Based on the inspection findings, the source of the water intrusion appears to be related to a structural integrity issue, most likely water penetrating through cracks or defects in the concrete rather than a plumbing failure. Advised the customer of the findings. Cleaned the work area upon completion of the inspection.

Electrician, giving a free electrical estimate for panel replacement

HVAC Maintenance: Completed routine preventative maintenance on a residential HVAC system to help improve efficiency and overall performance. Cleaned the condenser coil, inspected electrical components and wiring connections, checked refrigerant pressures, replaced the return air filter, and flushed the condensate drain line. Cycled the system through normal operation and verified proper airflow, temperature split, and thermostat function before completing service.

Replaced pressure reducing valve (PRV) and thermal expansion tank due to failure and high water pressure. Shut off main water supply, removed existing PRV and expansion tank, and installed new units to manufacturer specifications. Restored water service, adjusted pressure to proper range, and verified system stability. Checked for leaks and ensured proper operation of both components. Cleaned work area and confirmed home water pressure is now within safe limits.

Arrived on site to investigate a reported leak in the kitchen ceiling. Ran water in the upstairs bathroom fixtures to try to replicate the issue; however, no active leak was found at this time. Performed a full system check and discovered that the home’s water pressure is elevated beyond the recommended range. Determined that the pressure-reducing valve (PRV) is no longer functioning properly and the thermal expansion tank is also compromised. Recommended replacement of both the PRV and thermal expansion tank to bring the system back within safe operating pressure and prevent potential future leaks or damage.

Arrived on site to diagnose a gas water heater that was not producing hot water. Upon inspection, found that the pilot light was out. Checked the gas supply, thermocouple condition, and ensured there were no safety concerns or gas leaks present. Successfully relit the pilot light and confirmed proper operation of the water heater. Monitored the unit to ensure the burner ignited correctly and maintained a steady flame. Verified that the water heater is now heating properly and functioning as intended. Cleaned up work area and advised homeowner on proper operation and what to watch for if the issue reoccurs.

Arrived on site to address high water pressure and failing components on the home’s plumbing system. Upon inspection, found the pressure reducing valve (PRV) had failed, resulting in house pressure reading at 104 PSI, which is above safe operating limits. Replaced the faulty PRV with a new 1-inch pressure reducing valve and installed a new thermal expansion tank on the water heater to properly manage thermal expansion and protect the system. After installation, tested water pressure and confirmed it is now properly regulated at 64 PSI. Checked all connections and fittings to ensure there are no leaks and system is functioning as intended. Work area was cleaned and all equipment removed upon completion.

Performed service on toilet that was backing up and not flushing properly. Used a hand auger to clear the obstruction in the drain line, successfully removing a small amount of toilet paper buildup causing the issue. After clearing the blockage, tested the toilet by flushing six times to ensure proper flow and functionality. Toilet is now operating correctly with no signs of slow drainage or backup.

Completed a professional kitchen faucet installation, ensuring all connections were secure, leak-free, and operating at optimal water pressure. Removed the old unit and installed a new, efficient fixture to improve both functionality and style in the kitchen. Tested thoroughly for proper operation and clean finish.