Electricians & Plumbers in Powder Springs, GA

SHMV34D839E3-1 home owner Mary and David Knox 7704853762 call prior to arrival

Completed a full water main replacement for a residential property. Removed the existing deteriorated main line and installed new piping to restore proper water flow and pressure to the home. Ensured all connections were secure, system was properly pressurized, and tested for leaks to confirm reliable operation.

Completed replacement of 16 water supply lines due to age, corrosion, and minor leaking at multiple fixtures. Shut off main water supply, removed existing braided and rigid lines, and installed new high-quality braided stainless steel supply lines. Ensured proper sizing and secure connections at all fixtures including sinks and toilets.

Completed a tankless water heater replacement today. Removed the existing unit and installed a new high-efficiency tankless system. Updated water connections, gas line, and venting as needed to ensure proper operation and code compliance. Flushed and tested the system, verified gas pressure, checked for leaks, and confirmed proper temperature output at fixtures.

Our plumber arrived at the customer’s home to address multiple plumbing issues on the second floor. We successfully cleared a clogged tub drain, restoring proper drainage. While on site, we also diagnosed and repaired a leaking pipe under the bathroom sink, stopping water damage and preventing future issues. The customer’s plumbing system is now functioning properly, and all repairs were tested for leaks.

Electrician is replacing a gfci on existing circuit

estimate on a sewer repair

estimate on repipe of house

Electrician Installing ceiling fan

Electrician repairing switch and bathroom for light above sink

Addressed a severe toilet blockage. Isolated the water supply and removed the toilet to access the drain line. Utilized a closet auger to clear a significant obstruction within the drain. Inspected the flange for damage and re-seated the toilet with a new wax ring, ensuring a proper seal. Tested flushing action to confirm complete restoration of flow.

Investigated a persistent leak at the base of a toilet. Disconnected the water supply and carefully removed the toilet. Discovered a failed wax ring and corroded closet bolts. Cleaned the flange surface and replaced the bolts and wax ring with new components. Re-installed the toilet, ensuring a level and secure fit. Restored water supply and verified a leak-free seal.

Electrician is here installing a new 200 amp main breaker panel

Potable water pressure at main: 55 PSI (acceptable). Minor corrosion noted on kitchen cold water isolation valve; monitor. Internal camera inspection of bathroom lavatory drain revealed moderate organic/soap buildup in P-trap. Estimate includes optional valve replacement (compliant ball valve) and hydro-jetting for drain cleaning to optimize flow. No obligation.

Installed dedicated 20A, 120V circuit for new microwave per NEC 210.11(C)(2). Ran 12/2 AWG NM-B cable from existing panel to specified location, securing with appropriate staples. Installed new single receptacle in a dedicated box, ensuring proper grounding to the equipment grounding conductor. Verified voltage and polarity at the outlet. Circuit breaker labeled accordingly. Free estimate for future electrical needs.

Finalized device installations per work order. Replaced five standard duplex receptacles with tamper-resistant (TR) receptacles as per NEC 406.12. Installed three new AFCI/GFCI combination circuit breakers in panel to provide enhanced protection on branch circuits serving bedrooms and bathrooms (NEC 210.12 & 210.8). Verified proper grounding and tested all devices for correct operation and voltage. Updated panel schedule. Free estimate available for any future electrical upgrades or repairs.

plumber installing toilet

Electrician restoring power to bathroom lighting.